Toyota 2007 Tundra Owner's Manual page 201

07 04.26
XS13200
2. Open the anchor bracket cover with
the symbol as shown in the illustra-
tion.
XS13210
3. Pull the seatback release lever and
swing the seatback forward slightly,
then latch the hook onto the anchor
bracket. Return the seatback to its
original position.
Fix the child restraint system with
the seat belt and tighten the top
strap.
For instructions on installing the child re-
straint system, see "Child restraint" on
page 114 in this Section.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
CAUTION
D
When returning the seatback to its
original position, make sure
seatback is securely locked
pushing forward and rearward on
the top of the seatback. Failure to
do so will prevent the seat belt
from operating properly.
D
Make sure the top strap is securely
latched, and check that the child
restraint system is secure by push-
ing and pulling it in different direc-
tions. Follow all the installation in-
structions provided by its manufac-
turer.
the
by
145