After Changing Wheels; Aluminum Wheels - Toyota 2007 Tundra Owner's Manual

07 04.26

—After changing wheels

10.Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specifi-
cation designated on page 586 in
Section 8. If the pressure is lower,
drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire infla-
tion valve cap as dirt and moisture
could get into the valve core and
possibly cause air leakage. If the cap
is missing, have a new one put on as
soon as possible.
11. Restow all the tools, jack and
flat tire securely.
As soon after changing wheels as
possible, tighten the wheel nuts to the
torque specified on page 509 with a
torque wrench. Have a technician re-
pair the flat tire and replace the tem-
porary spare tire with it.
510
Initial adjustment of the
pressure warning system
necessary after your have replaced
your tires or wheels. See "Tire
pressure warning system" on page
251 in Section 1−7.
CAUTION
Before driving, make sure all the
tools, jack and flat tire are se-
curely in place in their storage
location to reduce the possibility
of personal injury during a colli-
sion or sudden braking.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
tire
is
XS40035

Aluminum wheels:

Before stowing the flat tire, remove
the center wheel ornament by pushing
from the reverse side.
Be careful not to lose the wheel orna-
ment.