Accessing The Cli - THOMSON SpeedTouch 610 Operation And Maintenance Manual
Business dsl routers release r4.2
Hide thumbs
Also See for SpeedTouch 610:
- Cli reference manual (564 pages) ,
- Orientation manual (78 pages)
Table of Contents
Advertisement
7 SpeedTouch™610 Command Line Interface
7.1 Accessing the CLI
Access via the web
pages
Access via a Telnet
session or serial
console
52
The SpeedTouch™610 CLI is accessible via its web interface. Browse to the Speed-
Touch™610 web pages and go to Advanced > CLI. As a result the CLI web menu is
opened:
All CLI groups and commands are placed in a menu. You can open a group by clicking
the
mark next to a group name, or clicking on the group name.
Clicking on a command name will execute it. Commands without parameters are indi-
cated
with and are executed immediately. Commands which require additional
parameters are indicated with
execute the command.
As soon a session to the CLI is opened, a banner pops up, followed by the CLI prompt:
Username : Administrator
Password : **********
-----------------------------------------------------------------------
*
*
*
*
*
_____/__
*
_/
*
//
*
_______//_______/
*
/
/ \
*
__/
/
\
*
/ /
/
\_______\/
* /_/______/___________________/ /________/ /___/
* \ \
\
___________
*
\_\
\
/
*
\
\/
*
\_____/
*
/__________/
*
\
_____
*
\ /
/\
*
/____/
*
\
\
*
\____\/
*
-----------------------------------------------------------------------
=>
If the SpeedTouch™610 is protected by a system password, authentication will be
required before access is granted to the CLI (e.g. as shown in the figure above).
. After you configured all parameters click Apply to
______
SpeedTouch 610
___/_____/\
/
/\\
Version 4.2.0.15
/
\\
/\_____/___ \
Copyright (c) 1999-2003,
/
\
/\ \
\
/ _\/______
\
/
/ /
\
/
/ /
/ /
/ /
\ \
\ \
/\
\ \
\ \___\/
/
\
\ \
/
\
\ \________\/
\
\
/
\
/_____\/
\
/___\/
\
\
/
/___\/
THOMSON
/\
/ _\__
/\
\
\
/
\
/
E-SIT-CTC-20030324-0002 v1.0
Advertisement
Table of Contents
