THOMSON SpeedTouch 610 Operation And Maintenance Manual page 13

Setting a
SpeedTouch™610
device related
identification label as
system password
E-SIT-CTC-20030324-0002 v1.0
The CLI session extract below illustrates the above procedure:
=>system setpassword
[userid] = Administrator
password = ******
Please retype password for verification.
password = ******
:system setpassword userid=Administrator password=_CYP_zHCpbK6s5Cb82
Security notification: Password changed, use 'saveall' to make it
permanent.
=>saveall
=>
You can equally execute the full system password configuration in one CLI command:
=>system setpassword userid=Administrator password=MyPassword
Security notification: Password changed, use 'saveall' to make it
permanent.
=>saveall
=>
Via the CLI you are able to configure some device related identification labels as system
password.
Available device related identification labels can be retrieved via the env list CLI
command:
=>env list
_COMPANY_NAME=THOMSON
_COMPANY_URL=http://www.thomson.net
_PROD_NAME=SpeedTouch
_PROD_URL=http://www.speedtouch.com
_PROD_FRIENDLY_NAME=SpeedTouch 610
_PROD_DESCRIPTION=Business DSL Router
_PROD_NUMBER=610
_BOARD_SERIAL_NBR=021090016
_PROD_SERIAL_NBR=CP021090016
_BUILD=4.2.0.15
_MODEMLABEL=MOD_SACHEM_SEA_CPE_V2.11.27
_PHYSLAYERTYPE=ISDN
_BUILDNAME=LLT5AA4.20F
_PRL=3EC18603GCAA
_FIA=NE
_BOARD_NAME=ADNT-R
_COMPANY_ID=ALCL
_COPYRIGHT=Copyright (c) 1999-2003, THOMSON
_TPVERSION=1.2.0
_ETHERNET=SINGLE
_MACADDR=00-90-D0-01-87-C1
_UDN=uuid:UPnP-SpeedTouch610-1_00-90-D0-01-87-C1
_IGDX_VERSION=1.1
_WIZ_AUTOPOPUP=1
...
=>
2 The SpeedTouch™610 System Password
11