THOMSON SpeedTouch 610 Operation And Maintenance Manual page 45

E-SIT-CTC-20030324-0002 v1.0
•
flush = <{yes|no}>
Allows you to define whether the SpeedTouch™610 should flush its current
configuration before loading the new one (yes). By default, and if not specified
flush = yes, the new loaded configuration is exclusively applied to the Speed-
Touch™610. If you specify flush = no, the new loaded configuration is appended
to the existing current configuration. The latter may result in an unexpected
behavior of the SpeedTouch™610.
•
echo = <{no|yes}>
Allows you to specify whether to echo each command string loaded from the new
configuration file (yes) or not (no). If not specified, echo=no.
•
filename = <string>
Allows you to specify the name of the configuration file to load, in case it is
different from user.ini. If not specified, the SpeedTouch™610 will assume the file
name to be user.ini.
Proceeding from the same FTP session you opened in the previous procedure, execute
the quote site config load command to load the configuration you previously put on the
SpeedTouch™610 permanent storage:
ftp> quote site config load
200-
200 CLI command "config load" executed
ftp>
In case the file name of the configuration file is different from user.ini, you should specify
the file name. This allows you to store multiple configuration files on the Speed-
Touch™610 permanent storage, and load them upon need:
ftp> dir
200 Connected to 10.0.0.1 port 2187
150 Opening data connection for /bin/ls
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rw-rw-rw- 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
226 Options: -l : 12 matches total
ftp: 803 bytes received in 0.10Seconds 8.03Kbytes/sec.
ftp> quote site config load filename=config3.ini
200-
200 CLI command "config load filename=config3.ini" executed
ftp>
5 SpeedTouch™610 Configuration Management
0 2252061 Jun 29
0 21 Jun 29
0 12016 Jun 29
0 256 Jun 29
0 3 Jun 29
0 0 Jun 29
0 256 Jun 29
0 12016 Jun 29
0 12016 Jun 29
0 12016 Jun 29
0 12016 Jun 29
1971 Bene4.208
1971 start.cmd
1971 user.ini
1971 IPSEC_VPN.swk
1971 config.inf
1971 ss_p12.dat
1971 SIP.swk
1971 config1.ini
1971 config2.ini
1971 config3.ini
1971 test.ini
43