Table of Contents
Advertisement
Chapter 5
SpeedTouch™ Web Interface
Preconditions
Using the
SpeedTouch™ IP
Using UPnP
44
5.1 Accessing the SpeedTouch™ Web Pages
Make sure that:
The SpeedTouch™ and your computer share the same IP subnet (192.168.1.0/
24). By default the SpeedTouch™ has a local IP address 192.168.1.254. To be
able to access the web pages, your computer needs to be configured for an IP
address in the same subnet, for example 192.168.1.2.
Your web browser is not using a proxy server and the SpeedTouch™ IP
address is not submitted to a proxy server.
For more information on how to disable your web browser's proxying,
please consult your web browser's Help.
Javascript is enabled on your web browser.
To access the SpeedTouch™ web pages:
1
Start the web browser on your computer.
address
2
Browse to the SpeedTouch™ at its IP address (default: http://192.168.1.254).
3
Type your SpeedTouch™'s User name (default: "admin") and Password
(default: "admin") and click OK to access the SpeedTouch™ web pages:
If your computer runs Windows XP Service Pack 2 (SP2) and you are using
!
the Windows Firewall, make sure the Windows Firewall allows incoming
network connections for the UPnP service (see
configuration" on page
If your computer is UPnP™ enabled you can access the SpeedTouch™ web pages
as follows:
1
Click (Settings >) Control Panel on the Start menu to open the Control Panel.
2
Go to Network and Internet Connections > My Network Places.
If you use the Control Panel in Classic View, click Network
Connections in the Control Panel and My Network Places under Other
Places.
3
The following window appears:
Double-click the SpeedTouch™ icon.
" Windows firewall
100).
E-DOC-CTC-20041126-0014 v3.0
Advertisement
Table of Contents
