THOMSON SpeedTouch 610 Operation And Maintenance Manual page 29

Software activation key
management via the CLI
E-SIT-CTC-20030324-0002 v1.0
You can overview the software modules and their status and link information via the
SpeedTouch™610 Command Line Interface (CLI).
See "7 SpeedTouch™610 Command Line Interface" on page 51
on how to access the Command Line Interface.
The software addon CLI command group allows you to overview the current soft-
ware modules, their status, and some additional information:
=>software addon
[software addon]=>list
IPSEC_VPN module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : IPSEC based VPN capability
SIP module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : Session Initiation Protocol capability
[software addon]=>
To allow for a successful activation of software modules no parts of the software
addon CLI command group should be changed, unless specifically instructed by your
Service Provider.
4 SpeedTouch™610 Software Activation Keys
for more information
27