THOMSON SpeedTouch 610 Operation And Maintenance Manual page 61

Files stored on the
permanent storage
E-SIT-CTC-20030324-0002 v1.0
The following is an example output of the SpeedTouch™610 '/dl' and '/active' subdirec-
tory content:
[peckelbs@unixhost]~>ftp 10.0.0.138
Connected to 10.0.0.138.
220 Inactivity timer = 120 seconds. Use 'site idle <secs>' to change.
Name (10.0.0.138:peckelbs): Administrator
331 SpeedTouch (00-90-D0-01-02-03) User 'Administrator' OK.
required.
Password:*********
230 OK
ftp> cd /dl
250 Changed to /dl
ftp> dir
200 Connected to 10.0.0.1 port 2464
150 Opening data connection for /bin/ls
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
226 Options: -l : 8 matches total
ftp: 533 bytes received in 0.22Seconds 2.41Kbytes/sec.
ftp> cd /active
250 Changed to /active
ftp> dir
200 Connected to 10.0.0.1 port 2465
150 Opening data connection for /bin/ls
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
226 Options: -l : 8 matches total
ftp: 533 bytes received in 0.21Seconds 2.54Kbytes/sec.
ftp>
Following file types can be found:
•
System software files (e.g. LLT5004.20F)
The SpeedTouch™610 system software file. The one in the '/active' directory is
currently used by the SpeedTouch™610; the one in the '/dl' directory is dormant.
•
Software activation keys (e.g. IPSEC_VPN.swk)
Software key files allowing the SpeedTouch™610 to enable the corresponding
software module at start-up. Per enabled software module, a software key must
be present in the '/dl' directory.
•
Configuration files (e.g. user.ini)
The most recent saved configuration of the SpeedTouch™610, or alternative
dormant configuration files, manually stored on the SpeedTouch™610. At start-up
the SpeedTouch™610 will load the user.ini configuration file residing in the '/dl'
directory.
•
Default configuration files (e.g. isp.def)
Depending on your ISP's or network administrator's preferences, your Speed-
Touch™610 may have a deviant default configuration after a reset. The isp.def file,
if present, reflects this deviant default configuration.
8 SpeedTouch™610 FTP Access
0 0 Jun 29
0 2314257 Jun 29
0 21 Jun 29
0 256 Jun 29
0 11503 Jun 29
0 3 Jun 29
0 3 Jun 29
0 256 Jun 29
0 2314257 Jun 29
0 21 Jun 29
0 11503 Jun 29
0 3 Jun 29
0 256 Jun 29
0 256 Jun 29
0 0 Jun 29
0 3 Jun 29
Password
1971 ss_p12.dat
1971 LLT5AA4.20F
1971 start.cmd
1971 SIP.swk
1971 user.ini
1971 config.inf
1971 build.flg
1971 IPSEC_VPN.swk
1971 LLT5AA4.20F
1971 start.cmd
1971 user.ini
1971 config.inf
1971 SIP.swk
1971 IPSEC_VPN.swk
1971 ss_p12.dat
1971 build.flg
59