THOMSON SpeedTouch 610 Operation And Maintenance Manual page 39

E-SIT-CTC-20030324-0002 v1.0
•
flush = <{yes|no}>
Allows you to define whether the SpeedTouch™610 should flush its current
configuration before loading the new one (yes). By default, and if not specified
flush = yes, the new loaded configuration is exclusively applied to the Speed-
Touch™610. If you specify flush = no, the new loaded configuration is appended
to the existing current configuration. The latter may result in an unexpected
behavior of the SpeedTouch™610.
•
echo = <{no|yes}>
Allows you to specify whether to echo each command string loaded from the new
configuration file (yes) or not (no). If not specified, echo=no.
•
filename = <string>
Allows you to specify the name of the configuration file to load, in case it is
different from user.ini. If not specified, the SpeedTouch™610 will assume the file
name to be user.ini.
5 SpeedTouch™610 Configuration Management
37