THOMSON SpeedTouch 610 Operation And Maintenance Manual page 25

E-SIT-CTC-20030324-0002 v1.0
Change to the SpeedTouch™610 '/dl' subdirectory:
3
ftp>cd dl
250 Changed to /dl
ftp>
Check whether a passive system software version is stored in the '/dl' subdirec-
4
tory. Therefor, execute the quote site software version command:
ftp> quote site software version
200- Active SW
200- Passive SW
200-
200 CLI command "software version" executed
ftp>
In case a passive software version is found, delete it. Therefor, execute the quote
5
site software deletepassive command:
ftp> quote site software deletepassive
200- Flash image : 4.2.0.15
200- Active SW
200- Passive SW
200-
200 CLI command "software deletepassive" executed
ftp>
Removing the passive system software may take up to 2 minutes to
Note
complete.
Put the upgrade system software to the SpeedTouch™610 '/dl' subdirectory:
6
ftp> put LLT5AA4.20G
200 Connected to 10.0.0.1 port 3638
150 Opening data connection for LLT5AA4.20G
##################################################################
##################################################################
##################################################################
##################################################################
##################################################################
########################################
226-Filesystem data garbage collection in progress.
a while ...
226 File written successfully
ftp: 2314257 bytes sent in 5.05Seconds 464.90Kbytes/sec.
ftp>
As a result the system software file is stored on the '/dl' subdirectory of the Speed-
Touch™610. In addition, the SpeedTouch™610 will automatically clean its permanent
storage.
3 SpeedTouch™610 System Software
: LLT5AA4.20F
: LLT5AA4.20F
: LLT5AA4.20F
: ---
This may take
23