THOMSON SpeedTouch 610 Operation And Maintenance Manual page 51

LAN Diagnostics
E-SIT-CTC-20030324-0002 v1.0
Use the expand button (or Expand all) to open the LAN Diagnostics:
The LAN Diagnostics provide information on SpeedTouch™'s local network Ethernet
interface(s).
Per Ethernet interface a visual indicator shows whether:
•
The interface is connected
•
The interface is disconnected
Per interface following data are shown:
• the interface's mode (forwarding or disabled)
•
The operation mode of the interface:
• 10BaseTHD: 10MB/s Base-T Half Duplex
•
10BaseTFD: 10MB/s Base-T Full Duplex
• 100BaseTHD: 100MB/s Base-T Half Duplex
•
100BaseTFD: 100MB/s Base-T Full Duplex
• Whether the operation mode is selected via negotiation (Yes) or manually set
(No)
•
The number of Kilo Bytes and Ethernet frames that are sent and received
• The number of discarded Ethernet frames.
6 SpeedTouch™610 Advanced Diagnostics
49