Speedtouch™610 Environment Variables - THOMSON SpeedTouch 610 Operation And Maintenance Manual
Business dsl routers release r4.2
Hide thumbs
Also See for SpeedTouch 610:
- Cli reference manual (564 pages) ,
- Orientation manual (78 pages)
Table of Contents
Advertisement
5.5 SpeedTouch™610 Environment Variables
SpeedTouch™610
environment variables
System variables
Preserved variables
Terminal variables
E-SIT-CTC-20030324-0002 v1.0
Via the CLI it is possible to retrieve the actual settings of the environment variables
supported by the SpeedTouch™610:
=>env list
_COMPANY_NAME=THOMSON
_COMPANY_URL=http://www.thomson.net
_PROD_NAME=SpeedTouch
_PROD_URL=http://www.speedtouch.com
_PROD_FRIENDLY_NAME=SpeedTouch 610
_PROD_DESCRIPTION=Business DSL Router
_PROD_NUMBER=610
_BOARD_SERIAL_NBR=0310KZ8YD
_PROD_SERIAL_NBR=CP0310KZ8YD
_BUILD=4.2.0.21
_MODEMLABEL=MOD_SACHEM_SEA_CPE_V2.11.28
_PHYSLAYERTYPE=POTS
_BUILDNAME=LLT5AA4.20L
_PRL=3EC18603GCAA
_FIA=NE
_BOARD_NAME=ADNT-R
_COMPANY_ID=ALCL
_COPYRIGHT=Copyright (c) 1999-2003, THOMSON
_TPVERSION=1.2.0
_ETHERNET=SWITCH
_MACADDR=00-90-D0-72-87-AA
_UDN=uuid:UPnP-SpeedTouch610-1_00-90-D0-72-87-AA
_IGDX_VERSION=1.1
_WIZ_AUTOPOPUP=1
CONF_REGION=---
CONF_PROVIDER=---
CONF_DESCRIPTION=Factory defaults
CONF_SERVICE=Service
CONF_DATE=
HOST_SETUP=auto
UPGRADE_URL=http://www.speedtouch.com/upgrade600.htm
CONF_TPVERSION=1.2.0
COLUMNS=80
ROWS=24
SESSIONTIMEOUT=120
=>
You can change the value of all variables except for the system variables (variables
starting with '_'). See
"The
tion.
All system variables start with an underscore at the beginning of their name ('_'). You
can not manually change the value of such variables as these are required for unique
identification of the device.
Preserved variables start with 'CONF' or 'HOST' at the beginning of their names.
Variables starting with 'CONF' are used by the SpeedTouch™ (embedded) Setup
wizard to allow identification and localization of the configuration profile/file.
Variables starting with 'HOST' can only be used by the SpeedTouch™ Setup wizard, run
from the SpeedTouch™ Setup CD-ROM, to allow automatic IP configuration of
Microsoft Windows systems.
In case of a telnet session or serial access the SESSIONTIMEOUT variable identifies
after how many seconds a session is disconnected. For security reasons this value is set
to 2 minutes (120 seconds) by default.
Use SESSIONTIMEOUT=0 to disable all connection time limitations for sessions.
5 SpeedTouch™610 Configuration Management
SpeedTouch™610
CLI Reference
Guide" for more informa-
45
Advertisement
Table of Contents
