THOMSON SpeedTouch 610 Operation And Maintenance Manual page 41

E-SIT-CTC-20030324-0002 v1.0
Optionally, you can make a listing of the subdirectory's contents:
5
ftp> dir
200 Connected to 10.0.0.1 port 2801
150 Opening data connection for /bin/ls
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rwxrwxrwx 1 0
-rw-rw-rw- 1 0
-rwxrwxrwx 1 0
-rw-rw-rw- 1 0
226 Options: -l
ftp: 400 bytes received in 0.01Seconds 40.00Kbytes/sec.
ftp>
The current configuration you saved in step
configuration files (stored via the :config save and :config backup CLI commands)
may be found.
Get the configuration file (in the example the currently saved configuration file
6
user.ini is backed up):
ftp> get user.ini
200 Connected to 10.0.0.1 port 1693
150 Opening data connection for user.ini (12016)
#####
226 File transfer complete
ftp: 12016 bytes received in 0.02Seconds 600.80Kbytes/sec.
ftp>
As a result the configuration file, containing a saved SpeedTouch™610 configura-
7
tion will be stored on the location from where you started the FTP session.
5 SpeedTouch™610 Configuration Management
0 2316185 Jun 29
0
0 14371 Jun 29
0 256 Jun 29
0
0 256 Jun 29
: 6 matches total
2 is stored in the user.ini file. Other
1971 LLT5AA4.20K
20 Jun 29 1971 start.cmd
1971 user.ini
1971 IPSEC_VPN.swk
0 Jun 29 1971 ss_p12.dat
1971 SIP.swk
39