Panasonic DP-8032 Service Manual page 266

Ver.1.2
(8) Connect one end of the MJR Harness and LIN
Harness to the MJR PC Board Assembly (CN22 and
CN25).
(9) Remove the Lower Protective Tab on the Left Rear
Cover for the LINE connection.
If installing an External Telephone, remove the upper
protective tab as well.
(10) Attach the Line Label to the Left Rear Cover as
illustrated.
(11) Install the MJR PC Board Assembly from the rear of
the machine by inserting the hooks into the slots on
the frame.
(12) Secure the MJR PC Board Assembly with 2
Screws.
(13) Connect the MJR PCB Harnesses to the FXB PC
Board (CN391 and CN392).
(14) Open the Right Cover and Front Cover.
(15) Remove the Toner Waste Container.
266
DP-8032/8025
2008