Panasonic DP-8032 Service Manual page 128

4.3.15. Document Skewing
4.3.15.1. LSU Skew Adjustment
< Example of Printed Image >
Document Leading Edge
< Example of Printed Image >
Document Leading Edge
Ver.1.2
START
Is the Test Pattern printout
in Copier F1 Mode normal?
Yes
Is the LSU normal?
Yes
END
(1) Open the Front Cover and the Right Cover.
(2) Slide the Process Unit out. (Refer to 2.2.4.)
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
(3) Remove the Front Left Cover. (Refer to 2.2.10.)
(4) Loosen 4 Red Screws.
Adjust the Lever Plate downwards and recheck the
Document Skewing. Readjust as needed.
One scale adjusts the skewed image by approximately
0.01 mm.
Adjust the Lever Plate upwards and recheck the
Document Skewing. Readjust as needed.
128
No
Check the Scanner
or ADF/iADF mechanism.
No
Check or replace LSU.
DP-8032/8025
2008