Ver. 1.2
(15) Open the 1st Paper Tray.
(16) Store the Shipping Metal Bracket, and the Blue
Screw into the space provided in the 1st Paper Tray.
(17) Close the 1st Paper Tray.
<Unlocking the Pressure Roller>
(18) Open the Right Cover.
(19) To unlock the Pressure Roller, using a Stubby
Phillips Screwdriver, tighten 2 Screws recessed in the
holes located on the Upper Fuser Cover.
<Installing the Stamp Assembly for Specified
Destinations only>
(20) Lift the Original Tray Assembly.
(21) Lower the Inverting Guide 2 Assembly.
(22) Install the Stamp Assembly.
(23) Return the Inverting Guide 2 Assembly and the
Original Tray Assembly to former
<Preparing the Process Unit>
(24) Remove 1 Screw (Front).
(25) Remove the Front Fixing Metal Bracket (longer
plastic tab).
(26) Remove 1 Screw (Rear).
(27) Remove the Rear Fixing Metal Bracket (shorter
plastic tab).
249
DP-8032/8025
position.
2008