2.2.5.
Fuser Unit
CAUTION:
To prevent from getting burned, do not install, remove, clean or make adjustments when the Fuser Unit is
hot.
Ver. 1.2
(1) Open the Right Cover (1201).
(2) Remove 1 Screw (6P).
(3) Remove the Harness Cover (1525).
(4) Unlock the Angled Rear Arm (1218) and
the Front Arm (1217).
(5) Open the Right Cover and hook the Angled Rear
Arm into the lower Hook Hole.
(6) Remove 1 Screw (6P).
(7) Remove the Support Plate (476).
(8) Remove 1 Screw (6P).
(9) Remove the Strap Cover (1022).
60
DP-8032/8025
2008