8.13. Installing the Stand (DA-DA311-PA / DA321-PA)
8.13.1. Contents
Qty.
Stand (DA-DA311-PA = High)
1
Stand (DA-DA321-PA = Low)
1
Joint Bracket A (Right Front)
1
Joint Bracket B (Right Rear)
1
Joint Bracket D (Left Front)
1
Joint Bracket E (Left Rear)
4
Screw
1
Installation Instruction
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.13.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Note:
The following illustrations depict the Installation of Stand (DA-DA311).
Ver.1.2
Description
(1) Place the machine on top of the Stand as illustrated.
Caution:
292
Remarks
2-Paper Trays Configuration
3-Paper Trays Configuration
Shorter piece
Longer piece
This document
The machine weights approximately 181 lb (82 kg)
with the i-ADF pre-installed. To prevent injuries, use
the appropriate number of personnel and the proper
equipment to lift or move the machine.
DP-8032/8025
2008