Panasonic DP-8032 Service Manual page 145

Code
U13 Add Toner
U14 Replace Toner Waste Container
U15 No Toner Waste Container
U16 No Developer Unit
U18 Total Copy Limit Over
U20 Close ADF Cover
U21 Close ADF
U22 Close ADF Exit Cover
U25 Shake Toner Bottle
U90 Replace Battery
4.6.2. Jam Error Codes (J Code)
A
Ver. 1.2
User Error Codes (U Code) Table
Item
E
B
D2
D3
D4
1. Toner Bottle incorrectly installed.
2. Low Toner.
3. Toner Sensor disconnected.
4. Toner Sensor defective.
5. SPC PCB connector disconnected.
6. SPC PCB defective.
1. Toner Waste Container full.
(See Sect. 3.5.4.)
1. Toner Waste Container not installed.
2. Toner Waste Container Sensor disconnected.
3. Toner Waste Container Sensor defective.
1. Developer Unit not installed.
1. Department Copy Counter full.
1. ADF Cover open.
2. ADF not installed correctly.
3. ADF Cover Sensor disconnected.
4. ADF Cover Sensor defective.
5. LVPS connector disconnected.
6. LVPS defective.
1. ADF and ADF Cover open.
2. ADF Sensor disconnected.
3. ADF Sensor defective.
1. ADF Exit Cover open.
2. ADF not installed correctly.
3. ADF Exit Cover Sensor disconnected.
4. ADF Exit Cover Sensor defective.
5. LVPS connector disconnected.
6. LVPS defective.
1. Toner blocked in the Toner Bottle.
1. Internal battery requires replacement.
Section
A
B
C
D2
D3
C
D4
E
145
Possible Cause(s)
Jam Location
Finisher
Paper Transport Area
Paper entry area
2nd Paper Feed Unit
3rd Paper Feed Unit
4th Paper Feed Unit
ADF/i-ADF
DP-8032/8025
2008