Panasonic DP-8032 Service Manual page 148

• Jam Sensor Location of Finisher
• Jam Sensor Location of i-ADF
Read Point
Sensor
Eject Sensor
• Jam Sensor Location of ADF
Read Point
Sensor
Eject Sensor
Code
J00 The Registration Sensor does not detect paper within a predetermined time after the
paper starts feeding. (Sheet Bypass)
J01 The Registration Sensor does not detect paper within a predetermined time after the
Paper Feed Roller starts rotating. (1st Feeder Unit)
J02 The 2nd Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (2nd Feeder Unit)
J03 The 3rd Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (3rd Feeder Unit)
J04 The 4th Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (4th Feeder Unit)
Ver.1.2
Finisher Exit Sensor
Stapler
Original Detection Sensor
Duplex Eject Sensor
Original Detection Sensor
Jam Error Codes (J Code) Table
Finisher Registration Sensor
Original Length Sensor
Contents
148
DP-8032/8025
Section
C
C
D2
D3
D4
2008