Panasonic DP-8032 Service Manual page 255

7.4.5. Internet Fax Function Confirmation
It is not necessary to set the parameter for the following suffix (Destinations). The Internet Fax Firmware is
automatically loaded with the Host Firmware.
PB : UK PG : Germany
Note:
For other destinations below, set "00 FAX Service Mode : 01 Function Param. Setting :
#005 Destination Code" by following the steps below.
000 : Austria
004 : Taiwan
008 : Italy
012 : Switzerland
017 : Belgium
021 : France
030 : Czech
034 : Indonesia
045 : Thailand
051 : East Euro
1. Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)", and the "3" keys simultaneously.
2. Input the Password, and select the "OK" button to enter the Service Mode (default password is
00000000).
3. Press the "9" key, and press the "START" key to enter the F9 Service Mode (Unit Maintenance).
4. Select "00 FAX Service Mode".
5. Select "01 Function Param. Setting".
6. Select the " " button, and select "005 Destination Code".
7. Select the "CHANGE" button.
8. Input the new Destination Code, and Select the "OK" button twice.
9. Select the " " button, and select "06 RAM Initialize".
10. Select "01 Parameter Initialize", and select the "YES" button.
11. Press the "STOP" key.
12. Press the "FUNCTION" and the "C (CLEAR)" keys simultaneously to exit the Service Mode.
13. Turn the Power Switch on the Left side of the machine to the OFF, and back to the ON position to
enable the parameter settings.
Note:
If the desired Language is not showed on the LCD Display, proceed the steps 7.4.3. : 1. ~ 7. & 11.
again.
7.4.6. User Authentication, and/or Via Fax Server Function Confirmation
(Specified Destinations only)
If your customer requires User Authentication, and/or Via Fax Server Function, setup the feature(s) by
referring to the Operating Instructions (For User Authentication) for the PU/PUG (USA/Canada, etc.).
Note:
For the other destinations below, set "00 FAX Service Mode : 01 Function Param. Setting :
#005 Destination Code" by following steps.
000 : Austria
011 : Australia
1. Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)", and the "3" keys simultaneously.
2. Input the Password, and select the "OK" button to enter the Service Mode (default password is
00000000).
3. Press the "9" key, and press the "START" key to enter the F9 Service Mode (Unit Maintenance).
Ver. 1.2
PM : Netherlands
001 : UK 002 : Canada
005 : Finland 006 : Germany
009 : Spain 010 : Hong Kong
013 : Norway 015 : Portugal
018 : Sweden 019 : Turkey
022 : New Zealand 025 : Japan
031 : Russia 032 : Greece
035 : South Korea 038 : Malaysia
048 : South Africa 049 : Singapore
001 : UK 006 : Germany
021 : France 022 : New Zealand
PK : China
255
PT : Taiwan PU/PUG : USA
003 : Denmark
007 : Netherlands
011 : Australia
016 : Ireland
020 : USA
029 : Poland
033 : Hungary
039 : China
050 : Universal
009 : Spain
DP-8032/8025
2008