Service Modes; Service Modes (For Copier) - Panasonic DP-8032 Service Manual

5 Service Modes

5.1.

Service Modes (For Copier)

These Service Modes are provided to assist the technician in checking for abnormalities in the copier and a
means of making adjustments to the Input/Output of major components.
Caution:
The factory default parameters are preset (country dependent) for optimum performance and in
compliance with the local telecommunication regulations/standards, and do not need to be changed.
Changing some of these parameters may cause the unit to be no longer compliant or become
inoperable.
5.1.1. Service Mode Procedure
1. To select the Service Mode
Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)", and the "3" keys simultaneously.
Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000).
2. To exit the Service Mode
The Service Mode is reset when the "FUNCTION" and "C (CLEAR)" keys are pressed
simultaneously.
5.1.2. Copier Service Mode Functions
Service
Mode
F1 Self Test
F2 Single Copy Test
F3 Continuous Copy Test
F4 Input / Output Status Test
F5 Function Parameters
F6 Adjust Parameters
F7 Electronic Counters
F8 Service Adjustment
F9 Unit Maintenance
Ver. 1.2
Service Modes (For Copier)
Item
00 CCD Test
01 LCD/LED Test
02 Page Memory Test
03 Print Test Pattern 1 Prints the pattern for setting the Paper position alignment.
04 Print Test Pattern 2 Prints the Slant pattern for setting the Paper position
05 Print Test Pattern 3 Prints the Grid pattern for setting the Paper position
06 Print Test Pattern 4 Prints the pattern for setting the Duplex Paper position
This test is used for checking the CCD.
This test is used for checking the LCD and LEDs.
This test is used for checking the Page Memory.
alignment.
alignment.
alignment.
One sheet is copied when the Start key is pressed.
Multi copies are made when the Start key is pressed.
The functioning of Input / Output items (selected item
numbers) is checked.
Various function settings (selected by code numbers) can
be changed.
Various function settings (selected by code numbers) can
be adjusted.
Electronic Counters for Maintenance
Perform pseudo-operation of an item (selected by code
numbers)
Fax Function Parameters
171
Function
DP-8032/8025
2008