Panasonic DP-8032 Service Manual page 100

2) Preparing the Firmware Code
Double click the appropriate Destination Shortcut Batch File, and copy the Firmware Code File on the
CD-ROM to the Firmware Data Folder in your PC, or access the Service Web site to download the
latest Firmware Code. When performing the self-extraction wizard for preparing the Firmware Code
File, make sure and agree with the license agreement, then input the password "1Panasonic!". The
Archive will be extracted automatically into the designated folder.
Example:
From : Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.bat
Firmware Code File
To : Firmware Data Folder
3) Preparing the Main Unit for the Programming Master Firmware Card
Important: DO NOT connect the USB Cable yet.
1. Turn the Power Switch on the left side and the Main Power Switch on the back of the machine to the
OFF position. (Refer to 3.7.7.)
2. Insert the Flash Memory Card (4 MB or 8 MB) into the machine.
3. Turn the Main Power Switch on the back and the Power Switch on the left side of the machine to the
ON position.
4. Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)", and the "3" keys simultaneously.
5. Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000).
6. Perform the Update Program Card Mode F9-09 (Update Program Card).
The unit is now ready to accept the firmware code from the USB Port.
Now connect the USB Cable between the Unit and PC. (Refer to the
the CD)
Repeat the above steps if there are additional master firmware cards to be programmed.
B. Copying the Firmware from an Existing Machine using a Flash Memory Card (4 MB or 8 MB)
1. Turn the Power Switch on the left side and the Main Power Switch on the back of the machine to the
OFF position. (Refer to 3.7.7.)
2. Install a Flash Memory Card (4 MB or 8 MB) into the machine.
3. Turn the Main Power Switch on the back and the Power Switch on the left side of the machine to the
ON position.
4. Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)", and the "3" keys simultaneously.
5. Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000).
6. Perform the Copy Service Mode F9-08 (Program Backup).
7. The firmware is copied into the Flash Memory Card.
8. After the backup is completed, press the "STOP" key first, then press the "FUNCTION", and "C
(CLEAR)" keys simultaneously to exit the Service Mode.
9. Turn the Power Switch on the left side and the Main Power Switch on the back of the machine to the
OFF position. (Refer to 3.7.7.)
10. Remove the Master Firmware Card that you just created from the machine.
11. Turn the Main Power Switch on the back and the Power Switch on the left side of the machine to the
ON position.
12. Use this Master Firmware Card to update the firmware on other machines.
3.7.6. Erasing the Master Firmware Card
1. Turn the Power Switch on the left side and the Main Power Switch on the back of the machine to the
OFF position. (Refer to 3.7.7.)
2. Install the Master Firmware Card into the machine.
3. Turn the Main Power Switch on the back and the Power Switch on the left side of the machine to the
ON position.
Ver.1.2
: DP-8032_8025_xx_xxxxxx.exe
: C:\ Panasonic \ Panasonic-FUP \ Data
100
Local Firmware Update Tool OI
DP-8032/8025
on
2008