Panasonic DP-8032 Service Manual page 161

Code Mode
730 RCV
731 RCV
741 XMT, Polling PSTN Unable to dial
742 XMT
800 Relay
Comm.
814 Conf. XMT
Conf. Polling
Relay
Comm.
815 Conf. RCV
816 Conf. Polled
825 Conf. RCV
Conf. Polled
850 Relay
Comm.
870 MEM XMT
Multi-Copy
879 Memory
RCV
880 -
884 -
961 RCV
962 XMT
Ver. 1.2
Fax Information Codes
Phase Description of Problem
LAN Unable to program the Internet
parameters or the autodialer via
Email from a PC.
LAN Dialer full while Relayed
Transmission Request was
received.
LAN Unable to dial to Key Operator
(Job Tracking, NYSE)
PSTN The machine was requested to
relay a document but has no Relay
Hub capability.
PSTN The remote station does not have
Relay XMT nor Confidential
Communication capability.
PSTN Mailbox full.
PSTN The received Polling Password did
not match.
PSTN Parameter settings of the remote
station are not properly set.
- Relay Communication is rejected.
PSTN Memory overflow occurred while
LAN storing documents into memory.
PSTN Memory overflow occurred during
substitute memory reception.
LAN Memory overflow.
Mail Server sent a reset command
while downloading the data to the
machine.
- File Access Error.
- File Access Error.
LAN Memory file access error.
PSTN Memory file access error.
LAN Memory file access error.
Verify that the Fax Parameter #158 is
set to Valid.
Dial buffer for manual number dialing
(70 stations) is being used.
Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
Incorrect setting or wrong number set.
The dept. code of the Fax Driver/
Panafax Desktop is mismatched with
the registered code in the machine.
Memory overflow on the Fax side.
Memory overflow on the Fax side.
Mail server aborted the download
(Busy with other higher priority jobs).
SC PCB defective.
SC PCB defective.
SC PCB defective.
161
DP-8032/8025
Possible Cause(s)
2008