Panasonic DP-8032 Service Manual page 206

No. Parameter
082 JAM Length
083 Not Used
084 Line As No
Paper
085 Not Used
086 Reduction Fine
087 Darker Level
088 Normal Level
089 Lighter Level
090 Not Used
~
091
092 Smoothing
093 Not Used
~
101
102 Original
Registration
103 Trail Edge Read
Timing
104 Not Used
~
109
110 MAC Address
111 Not Used
112 Insert EMAIL
TXT
113 Not Used
~
114
Ver.1.2
Function Parameter Table
Selections
1 = 1 m
2 = 2 m
1 = Ring (ring)
2 = Busy (keep line busy)
1 = Off
2 = On
0 (Lightest)
~
15 (Darkest)
0 (Lightest)
~
15 (Darkest)
0 (Lightest)
~
15 (Darkest)
1 = Off
2 = On
-30
~
+30
-9
~
0
1 = Off
2 = On
Selects the maximum length of the original that can
be scanned.
Selects whether to ring or send a busy tone to the
remote station when the recording paper runs out or
the unit cannot receive because of any trouble.
Selects whether the resolution is preset to Fine,
when sending with reduction B4→A4.
Selects the contrast level.
Selects the contrast level.
Selects the contrast level.
Selects whether the smoothing function is available.
Adjustment of original registration detection timing.
Adjustment of trail edge void.
Indicates the MAC Address.
Selects whether the Text Template (email message)
is programmable and added on all email sent in the
message body above the top line of text. (Up to 40
characters Programmed in the User Parameters.)
Note:
After enabling this feature, aside from entering
the text in the User Parameters, it also has to be
activated in each Auto Dial Number before it will
take effect. It does not work for Direct Dialed
Numbers.
206
DP-8032/8025
Function
2008