Panasonic DP-8032 Service Manual page 179

No. Function
021 Home Position Sensor
ADF/Platen Cover Open Sensor ADF/Platen Cover is
ADF/Platen Cover Angle
Sensor
Fuser Lamp Disconnect
Detection Sensor
+24V Line Error Detecting
Signal
022- Not Used
029
030 ADF B1 Sensor
ADF B2 Sensor
ADF Paper Exit Detection
Sensor
ADF Inverting Cover Open
Detection Sensor
ADF Cover Open Detection
Sensor
ADF Detection Sensor 1
ADF Detection Sensor 2
031 ADF Original Sensor
ADF Original Width Sensor
ADF Original Width Sensor
ADF Original Length Sensor 2
ADF Original Length Sensor 1
032- Not Used
039
2. Output Check
Press the "START" key to start and press the "STOP" key to reset.
No. Item
040 Total Counter
Ver. 1.2
F4 Mode (Input Check)
Condition
Home position is
detected.
open.
ADF/Platen Cover is
open more than 30°
angle.
No Lighting
+24V Line is ON.
Original is detected.
Original is detected.
Original is detected.
Cover is open.
Cover is open.
See Remarks.
See Remarks.
Original is detected.
Original is detected.
Original is detected.
Original is detected.
Original is detected.
F4 Mode (Output Check)
Function
When SPC PCB CN715-8 signal level changes to
0V from +24V, count up the Total Counter.
179
Message
Display
7 6 5 4 3 2 1 0
1 (270)
1 (1903)
1
1
---
1
1 (1045) Fig.18/33 C6
1 (1045) Fig.17 C7
1 (1045) Fig.17 C8
1 (1045) Fig.17 G2
1 (1045) Fig.16/33 E1
* iADF
Signal 1 = 1
*
Signal 2 = 1
ADF
Signal 1 = 1
Signal 2 = 0
A different signal
pattern, indicates that
the unit is not
connected.
1 (1045) Fig.17/32 G2
1 (1981)
1
1 (1045) Fig.16/31 K2
1
---
DP-8032/8025
Remarks
(Ref.No.)
Fig.32 G4
Fig.32 D3
Remark
(Ref.No.)
2008