Ver.1.2
(5) Join the Caster and the 4th Paper Tray Unit with the
Joint C Plates (FR/RR), Joint F Plate (FL) and Joint G
Plate (RL).
(6) Secure the Joint C Plates, Joint F Plate and Joint G
Plate with 4 Screws.
(7) Place the 3rd Paper Tray Unit on the 4th Paper Tray
Unit.
(8) Remove 2 Silver Screws.
(9) Remove the Lower Rear Cover.
(10) Slide the 3rd Paper Tray out of the unit.
(11) Install the 4 Brackets.
(12) Secure the 4 Brackets with 8 Screws.
(13) Connect the Harness of the 4th Paper Tray Unit to
CN808 on the CST3 PC Board of the 3rd Paper Tray
Unit.
Note:
Ensure the White Mark on the connector is facing
Upward, inserting the connector upside down, may
damage the machine's SPC or CST PC board.
(14) Place the Harness into the clamp.
286
DP-8032/8025
2008