HP 1910 User Manual page 92

Figure 63 Configure the rate of GigabitEthernet 1/0/4
Batch configure the auto-negotiation rate range on GigabitEthernet 1/0/1, GigabitEthernet
2.
1/0/2, and GigabitEthernet 1/0/3 as 100 Mbps.
On the Setup tab, select Auto 100 from the Speed list, as shown in
a.
Select 1, 2, and 3 on the chassis front panel. 1, 2, and 3 represent ports GigabitEthernet
b.
1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3.
Click Apply.
c.
31
Figure 64.