HP 1910 User Manual page 427

A configuration progress dialog box appears.
After the configuration process is complete, click Close.
f.
Figure 385 Configuring the authorization method for the ISP domain
On the Accounting tab, select the ISP domain test, select the Default Accounting box, select
g.
RADIUS from Default Accounting list, select system from the Name list to use it as the
accounting scheme, and click Apply.
The configuration progress dialog box appears.
After the configuration process is complete, click Close.
h.
Figure 386 Configuring the accounting method for the ISP domain
Configure Layer 3 portal authentication:
5.
From the navigation tree select Authentication > Portal.
a.
The portal server configuration page appears.
In the Portal Application: Layer 3 Interfaces area, click Add.
b.
On the page that appears, select the interface Vlan-interface100, select Add for Portal Server
c.
to add a portal server, select the Direct portal authentication mode, enter the portal server
name newpt, the portal server IP address 192.168.0.111, the shared key portal, the port
366