Ipv4 Traceroute Operation - HP 1910 User Manual

NOTE:
Before performing the traceroute operation, execute the ip ttl-expires enable command on intermediate
devices to enable the sending of ICMP timeout packets, and execute the ip unreachables enable
command on the destination device to enable the sending of ICMP destination unreachable packets.

IPv4 traceroute operation

Select Network > Diagnostic Tools from the navigation tree.
1.
Click the IPv4 Traceroute tab.
2.
The IPv4 traceroute configuration page appears.
Figure 310 IPv4 traceroute configuration page
Type the IPv4 address or host name of the destination device in the Destination IP address or host
3.
name field.
Click Start to execute the traceroute command.
4.
View the operation result in the Summary area.
5.
299