HP 1910 User Manual page 377

In the Ports With 802.1X Enabled area, click Add.
2.
Figure 326 802.1X configuration on a port
Configure the 802.1X feature on a port as described in
3.
Click Apply.
4.
Table 106 Configuration items
Item
Port
Port Control
Port Authorization
Max Number of Users
Description
Select a port where you want to enable 802.1X. Only 802.1X-disabled ports are
available.
Select an access control method for the port, which can be MAC Based or Port
Based.
Select the 802.1X authorization mode for the port.
Options include:
•
Auto—Places the specified or all ports initially in the unauthorized state to
allow only EAPOL packets to pass, and after a user passes authentication, sets
the port in the authorized state to allow access to the network. You can use this
option in most scenarios.
•
Force-Authorized—Places the specified or all ports in the authorized state,
enabling users on the ports to access the network without authentication.
•
Force-Unauthorized—Places the specified or all ports in the unauthorized
state, denying any access requests from users on the ports.
Set the maximum number of concurrent 802.1X users on the port.
316
Table 106.