HP 1910 User Manual page 375

Figure 324 802.1X global configuration
In the 802.1X Configuration area, select the Enable 802.1X box.
2.
Select an authentication method. Options include CHAP, PAP, and EAP. For more information
3.
about EAP relay and EAP termination, see
CHAP—Sets the access device to perform EAP termination and use the CHAP to communicate
with the RADIUS server.
PAP—Sets the access device to perform EAP termination and use the PAP to communicate with
the RADIUS server.
EAP—Sets the access device to relay EAP packets, and supports any of the EAP authentication
methods to communicate with the RADIUS server.
Click Advanced.
4.
The advanced 802.1X configuration area is expanded, as shown in
Figure 325 802.1X configuration page
Configure advanced 802.1X settings as described in
5.
802.1X timers, see
Click Apply.
6.
"802.1X timers."
314
"A comparison of EAP relay and EAP
Table 105. For more information about
termination."
Figure 325.