Adding An Ipv6 Acl - HP 1910 User Manual

Item
Action
MAC
Address
Filter
COS(802.1p priority)
Type Filter
Time Range

Adding an IPv6 ACL

Select QoS > ACL IPv6 from the navigation tree.
1.
Click the Create tab to enter the IPv6 ACL configuration page, as shown in
2.
Figure 451 Adding an IPv6 ACL
Add an IPv6 ACL.
3.
Description
Select the action to be performed for packets matching the rule.
•
Permit—Allows matched packets to pass.
•
Deny—Drops matched packets.
Source MAC
Select the Source MAC Address box and enter a source MAC address and
Address
a mask.
Source Mask
Destination MAC
Select the Destination MAC Address box and enter a destination MAC
Address
address and a mask.
Destination Mask
Specify the 802.1p priority for the rule.
LSAP Type Select the LSAP Type box and specify the DSAP and SSAP fields in the LLC
encapsulation by configuring the following items:
•
LSAP Type—Indicates the frame encapsulation format.
LSAP Mask
•
LSAP Mask—Indicates the LSAP mask.
Protocol Type Select the Protocol Type box and specify the link layer protocol type by
configuring the following items:
•
Protocol Type—Indicates the frame type. It corresponds to the type-code
Protocol Mask
field of Ethernet_II and Ethernet_SNAP frames.
•
Protocol Mask—Indicates the protocol mask.
Select the time range during which the rule takes effect.
433
Figure 451.