HP 1910 User Manual page 441

Figure 401 RADIUS Server page
Configure the RADIUS server parameters as described in
2.
Click Apply.
3.
Table 119 Configuration items
Item
Server Type
Primary Server IP
Primary Server UDP Port
Primary Server Status
Secondary Server IP
Secondary Server UDP Port
Description
Specify the type of the server to be configured, which can be Authentication
Server and Accounting Sever.
Specify the IP address of the primary server.
If no primary server is specified, the field displays 0.0.0.0.
To remove the previously configured primary server, enter 0.0.0.0.
The specified IP address of the primary server cannot be the same as that of the
secondary server.
Specify the UDP port of the primary server.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the port number is 1812 for authentication or 1813 for
accounting.
Set the status of the primary server, including:
•
Active—The server is working normally.
•
Blocked—The server is down.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the status is Blocked.
Specify the IP address of the secondary server.
If no secondary server is specified, the field displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0.
The specified IP address of the secondary server cannot be the same as that of
the primary server.
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
380
Table 119.