HP 1910 User Manual page 147

Figure 120 Configuring the SNMP agent
Select the Enable option, and select the v1 and v2 options.
b.
Set Hewlett-Packard Development Company,L.P. as the contact person, and HP as the physical
c.
location.
Click Apply.
d.
Configure a read-only community:
2.
Click the Community tab.
a.
Click Add.
b.
The Add SNMP Community page appears.
Figure 121 Configuring an SNMP read-only community
Enter public in the Community Name field, and select Read only from the Access Right list.
c.
Click Apply.
d.
86