Configuring The Monitor Port As Gigabitethernet 1/0/3 - HP 1910 User Manual

Figure 71 Configuring the mirroring ports

Configuring the monitor port as GigabitEthernet 1/0/3

Click the Modify Port tab to enter the page, as shown in
1.
Select 1 – Local from the Mirroring Group ID list, select Monitor Port from the Port Type list, and
2.
select 3 (GigabitEthernet 1/0/3) on the chassis front panel.
Click Apply.
3.
A configuration progress dialog box appears.
After the success notification appears, click Close.
4.
Figure
40
72.