Static Arp Configuration Example; Network Requirements; Configuring Switch A - HP 1910 User Manual

Static ARP configuration example

Network Requirements

As shown in
interface GigabitEthernet 1/0/1 belonging to VLAN 100.
Configure static ARP entries on Switch A to enhance communication security between Switch A and
Router B.
Figure 232 Network diagram

Configuring Switch A

Create VLAN 100:
1.
Select Network > VLAN from the navigation tree.
a.
Click the Add tab.
b.
Enter 100 for VLAN ID and click Create.
c.
Figure 232, hosts are connected to Switch A, which is connected to Router B through
222