Acl Assignment Configuration Example - HP 1910 User Manual

Figure 336 Configuring the AAA accounting method for the ISP domain

ACL assignment configuration example

Network requirements
As shown in
access device.
Perform 802.1X authentication on the port. Use the RADIUS server at 10.1.1.1 as the authentication and
authorization server and the RADIUS server at 10.1.1.2 as the accounting server. Assign an ACL to
GigabitEthernet 1/0/1 to deny the access of 802.1X users to the FTP server at 10.0.0.1/24.
Figure 337 Network diagram
Host
192.168.1.10
Configuring the IP addresses of the interfaces
Details are not shown.
Configuring a RADIUS scheme
From the navigation tree, select Authentication > RADIUS.
1.
The RADIUS server configuration page appears.
Configure the RADIUS primary authentication server:
2.
Select the server type Authentication Server.
a.
Figure 337, the host at 192.168.1.10 connects to port GigabitEthernet 1/0/1 of the network
Vlan-int2
192.168.1.1/24
GE1/0/1
Switch
Authentication servers
(RADIUS server cluster)
10.1.1.1
10.1.1.2
Internet
FTP server
324
10.0.0.1