Setting Parameter Table In Pdl Setting Menu - Oki Teriostar LP-1030 User Manual

- Format Parameters (only with HP-GL and D-SCAN)
- Pen Parameters (only with HP-GL and D-SCAN)
- Raster Parameters
The PDL Setting menu is browsed or changed even during printing. However, any
changed parameters are valid only from the job received after the change.
At the end of the setup operation, changed parameters are saved automatically,
while the browsed parameters are not saved.
The following sections describe the setting parameter tables in the PDL Setting
menu, and explain each parameter. While most of the setting parameters are
shared by all the PDL, some parameters are not displayed depending on the PDL,
which is explained in the list.
Example: Only with D-SCAN
‹ Setting Parameter Table in PDL Setting Menu
In the PDL Setting menu, PDL parameters are selected.
By setting the PDL parameters, print modes are specified.
In the Setup menu, the following items are also available.
Menu
PDL Setting
Item
Sets the parameter for the PDL table of
Ethernet port n. Settings for printing in
Port n_HP-GL
HP-GL format are performed with this
parameter.
Sets the parameter for the PDL table of
Ethernet port n. Settings for printing in
Port n_D-SCAN
D-SCAN format are performed with this
parameter.
Sets the parameter for the PDL table of
Ethernet port n. Settings for printing
Port n_TIFF
in TIFF format are performed with this
parameter.
Sets the parameter for the PDL table of
Ethernet port n. Settings for printing in
Port n_CALS
CALS format are performed with this
parameter.
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Setup Items in PDL Settings Menu
T
Function
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
109