Oki Teriostar LP-1030 User Manual page 93

Wide format printer
Hide thumbs Also See for Teriostar LP-1030:
Table of Contents

Advertisement

y
DHCPv6
Set the options when the Printer is installed in an environment with automatic IPv6
address distribution from the DHCP server.
<Parameter by selecting options>
RA
n
On
Off
z
Routing Table
Sets the routing table for the Printer. This is used when connecting the Printer with
a host on a different network.
y
Gateway Address 01 to 10
Sets the IP address of the router.
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255
y
Network Address 01 to 10
Sets the network address.
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255
The gateway address set to 000.000.000.000 specifies the default routing
z
: Default value
n
The IPv6 address is obtained automatically using RA
(router advertisement). This is the parameter generally
used.
The IPv6 address is forcibly obtained from the DHCP
server.
The IPv6 address is not automatically obtained from the
DHCP server.
Default value:
0.0.0.0 (not set)
Default value:
000.000.000.000 (not set)
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
System Menu
T
Chapter
Chapter
Chapter
Chapter
Chapter
93
1
2
3
4
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teriostar lp-1030-mf

Table of Contents