Printer Engine Menu; Power Save Time; Top Cut Timer (Roll 1-2) - Oki Teriostar LP-1030 User Manual

Printer Engine Menu

Chapter
1
‹ Power Save Time
Chapter
2
Chapter
3
Chapter
4
Chapter
5
‹ Top Cut Timer (Roll 1-2)
86
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
The Printer Engine menu specifies the operation conditions for the Printer engine.
The parameter specifies the maximum idle time before entering the power save
mode.
<Parameter by selecting options>
15 minutes
30 minutes
60 minutes
n
90 minutes
235 minutes
After printing is completed, the Printer enters power save mode automatically when
z
the data waiting status reaches the set time.
The power save mode is canceled automatically when the Printer receives the data.
z
The power save mode is canceled automatically when the Printer is accessed with a
z
browser or SNMP manager.
To cancel the power save mode, press POWER SAVE while the Printer is in the power
z
save mode.
Sets the data waiting time after which the end of the roll paper is cut automatically.
This is performed when data is received for printing after the data waiting status
has continued for a while.
: Default value
n
Enters power save mode if the Printer is not operated for
15 minutes.
Enters power save mode if the Printer is not operated for
30 minutes.
Enters power save mode if the Printer is not operated for
60 minutes.
Enters power save mode if the Printer is not operated for
90 minutes.
Enters power save mode if the Printer is not operated for
235 minutes.