Printer Engine Menu
T
Chapter
1
Print Density
Chapter
2
Chapter
3
Humidity for Tracing Paper
Chapter
4
Chapter
5
Power Saving in Standby
88
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Adjusts the print density.
<Parameter by selecting options>
Low
Slightly Low
Normal
n
Slightly High
High
The parameter specifies the print mode for tracing paper.
<Parameter by selecting options>
Normal
n
High Humidity
Configure the power-saving mode when the Printer is in standby.
<Parameter by selecting options>
Off
n
Medium
High
: Default value
n
: Default value
n
Specifies the print mode for the tracing paper printed
under the normal environmental condition.
Specifies the print mode for the tracing paper printed
under the high-humidity environmental condition.
: Default value
n
Power saving is low, but warm-up time is short.
Power saving is fairly high, but warm-up time is fairly
long.
Power saving is high, but warm-up time is long.