Tiff Tags - Oki Teriostar LP-1030 User Manual

‹ TIFF Tags
The meaning of the symbols in the table is as follows.
Yes: Indicates commands supported by the Printer.
Partially: Indicates the corresponding functions are partially supported by the Printer.
No: Indicates tags not supported by the Printer.
TIP
‘ The tags supported by the Printer are equivalent to TIFF Revision 4.0.
‘ When data larger than the spool buffer size is received, an error message is
displayed on the panel. The data is disregarded.
‘ If the Printer receives any non-supported tags, it ignores them.
Command
Name Hexadecimal
NewSubfileType
SubfileType
ImageWidth
ImageLength
BitsPerSample
Compression
PhotometricInterpretation
FillOrder
StripOffsets
Orientation
SamplesPerPixel
RowsPerStrip
StripByteCounts
MinSampleValue
MaxSampleValue
XResolution
YResolution
PlanerConfigration
XPosition
YPosition
T4Options
ResolutionUnit
Color Map
00FE Specifies the type of image data.
00FF Specifies the type of image data.
0100 Specifies the number of pixels for each image line.
0101 Specifies the number of image lines.
0102 Specifies the number of bits for each sample.
0103 Specifies the compression format.
0106 Specifies the interpretation method for the values in the bitmap.
010A Specifies the format for storing pixel data in bytes.
0111 Specifies the offset value for each strip.
Specifies the position of the image origin point, the pixel
0112
forward direction, and the line forward direction.
0115 Specifies the number of samples for each pixel.
0116 Specifies the number of lines before each strip is compressed.
0117 Specifies the number of bytes after each strip is compressed.
0118 Specifies the minimum sample value.
0119 Specifies the maximum sample value.
Specifies the number of pixels in each resolution unit in the
011A
line direction.
Specifies the number of pixels in each resolution unit in the
011B
row direction.
011C Specifies the format for storing each pixel element.
011E Specifies the offset value for the image X direction.
011F Specifies the offset value for the image Y direction.
0124 Specifies the option information for T4 compression.
Specifies the physical unit of resolution units in the X
0128
Resolution and Y Resolution tags.
0140 Specifies the palette color table (RGB).
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Function
Command Lists
Chapter
1
Chapter
2
Chapter
3
Supported
Partially
Chapter
4
Partially
Yes
Yes
Yes
Yes
Chapter
Yes 5
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Partially
Yes
Yes
243