Ports Settings Menu; Common Settings - Oki Teriostar LP-1030 User Manual

Ports Settings Menu

Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
‹ Common Settings
n
104
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
In the ports setting menu, set the communication protocol and the PDL used for
each port.
The Printer is equipped as standard with an Ethernet interface connector through
which 10 logical ports can be used.
The settings for the protocol of each port are set in this menu.
Computer
Port 10
Port 7
Port 6
Port 1
Note
The system is reset after the setting in this menu is changed.
‹
If the Printer contains waiting jobs, only browsing is available.
‹
A total of 10 ports is available, including XTP, LPD, and FTP.
‹
Connection Timeout
Select a wait time to close the TCP port. The Printer starts counting the time when
the Printer is not receiving data during the data transmission.
Ethernet