Oki Teriostar LP-1030 User Manual page 113

<Parameter by selecting options>
Same as Original Size
Standard Size
n
Print as A Series
Note
The default value varies depending on the Printer initialization category.
‹
With user defined series paper, the Printer always prints at the same size as
‹
the original.
n
Print Copies
Sets the number of copies to print
With HP-GL data, the data setting is prioritized if the number of print copies is
specified in the data.
<Parameter by entering numbers>
1 to 999
n
Centering
The Printer prints the image centered on the paper.
<Parameter by selecting options>
Off
n
On
The image is not centered when the data size is larger than the spool memory
T
: Default value
n
The Printer prints at the original size.
The Printer prints at the standard size.
This parameter is valid only with A series paper. The Printer
prints on:
- A1 to A4 size paper; and
- Extended A1 to A4 size paper, at which the longer side is
increased by multiples of the longer side's half length.
When the paper is not A series paper, the Printer prints at the
standard size.
Default value = 1, unit in pages
: Default value
n
The printed image is not centered.
The printed image is centered.
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Setup Items in PDL Settings Menu
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
113