Replacing The Roll Paper - Oki Teriostar LP-1030 User Manual

Replacing the Roll Paper

Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
44 44
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
This section describes the removal and installation procedures at the roll paper
replacement.
When the roll paper is running out, the roll paper icon on the screen changes as
follows.
Once the icon has changed, the Printer can issue approximately 50 m (1968.50
inches) of printout. So get ready to replace the paper roll with a new one.
When the roll paper is used up, an error lamp lights up, and the following is
displayed on the screen.
TIP
‘ When the prompt message to supply paper appears, you can cancel the
one page of the job waiting for the paper. Apply this function when the
required paper is not available any more.