Oki Teriostar LP-1030 User Manual page 102

System Menu
T
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
n
102
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
z
Save/Delete Complete Job
The parameter specifies if completed jobs should be saved or deleted. Select Save
when you intend to reprint the completed job with the Web functions.
<Parameter by selecting options>
Delete
Save
n
z
Optional Folder
Your printer does not use this parameter. So always set the parameter to Not
Enabled. With Enabled, the printer will not start correctly.
z
PDtF box retention period
Specifies the period jobs are stored in the PDtF box.
Jobs are automatically deleted when the specified period expires.
<Parameter by selecting numbers>
1 to 199
z
Job Display Order
Specifies the display order of the print job list on the panel.
<Parameter by selecting options>
Chronological
n
Reverse Chronological
Multifunction Settings
z
Start Scanning
The parameter selects the scanning started:
- Automatically when an original is set; or
- With the START button pressed after an original is set.
<Parameter by selecting options>
Original Setting
n
Press START
: Default value
n
Delete completed jobs.
Save completed jobs.
Default value: 72 hours
: Default value
n
Jobs are displayed in chronological order on the print job
list screen.
Jobs are displayed in reverse chronological order on the
print job list screen.
MF
: Default value
n
Starts scanning automatically when an original is set.
Starts scanning when the START button is pressed after
an original is set.