4
4.7
Zoom Setting
Use this setting in order to make a copy using different-sized paper from the
original, or to enlarge/reduce the image size.
The machine is initially set to make a copy in full size (e1.000) mode.
This section describes how to make the Zoom setting.
To copy in full size (e1.000) mode
Use this mode to make a copy of the same size as the original image
irrespective of the paper size to be used.
0 The full size (e1.000) mode is initially specified as default. If setting
change has been made, follow the procedure below to specify this mode.
0 Pressing [Reset] on the control panel will resume the full size (e1.000)
mode, unless the initial setting with that mode specified has not been
changed. In this case, other setting changes will also return to the initial
condition.
0 Use the [+] and [–] keys on the Zoom Screen to make a fine adjustment
on specified magnification ratio. Touch [+] to increase, or [–] to decrease
the ratio in 0.001 increments.
1
Downloaded From ManualsPrinter.com Manuals
4-36
Touch [Zoom] on the Basic Screen.
The Zoom Screen will be displayed.
Basic Copy Operations
bizhub 500/420/360 (Phase 3)