8
5
6
7
Downloaded From ManualsPrinter.com Manuals
8-4
–
If the sample copy gives satisfactory result, proceed to step 9.
To change any settings, proceed to the next step.
Touch [Change Setting] on the Proof Copy Screen.
The Change Setting Screen will be displayed.
Make the setting change as desired.
–
The following settings can be changed from the screen after proof
copying.
Print Quantity
Simplex/Duplex (except for the simplex/duplex original type)
Finishing
Folding
Cover Mode
Insert Sheet
Chapters
Page Margin
Stamp/Overlay
–
To change the print quantity, press [C] (Clear) on the control panel,
then reenter the desired value from the control panel keypad.
To change the simplex/duplex copy mode, touch [1-Sided] or [2-
Sided].
To make other setting changes, touch the desired key to display the
setting screen for each function.
–
To cancel the setting change, touch [Cancel Change]. The previous
setting will be restored.
Repeat the steps 3 to 6 until the desired copy result is obtained.
–
If the desired setting cannot be changed, delete the current job and
restart the job setting from the first step. See the next step for
details.
Advanced Information
bizhub 500/420/360 (Phase 3)