Konica Minolta bizhub 500 User Manual page 236

5
4
5
Note
Touch [Cancel] on the Page Margin Screen to cancel the setting change.
Press [Reset] on the control panel to restore the factory default setting.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
Downloaded From ManualsPrinter.com Manuals
5-20
Touch the desired binding position key to highlight it.
Touch [OK], then touch [Basic] tab.
The Basic Screen will be restored.
Combine Originals/ Original Image Type
bizhub 500/420/360 (Phase 3)